Swivel Concrete Anchor Kit

Our Price: $87.99

Availability: Usually Ships in 24 to 72 Hours
Product Code: 00242

Qty:

Description

Technical Specs

Guardian Fall Protection Concrete Swivel Anchor Kit

The Guardian Fall Protection Concrete Swivel Anchor is specially designed to include a visual indicator that allows the user to clearly see when it is installed correctly (when proper torque is reached, the red cap will break away to display a green cap). This anchorage connector is composed of high strength steel and stainless steel to make it capable of functioning in a variety of rough environments, and functions to rotate 180° to allow for increased mobility. It is compliant with all applicable OSHA and ANSI regulations, and is suited for both temporary and permanent applications.

Concrete Swivel Anchor

• Has a visual indicator that allows the user to see that the anchor is hooked up properly: the red cap will break off & green will appear once the proper torque is reached
• Sturdy design of high strength plated steel & stainless steel makes the anchor capable of working in a wide variety of rough environments
• Rotates 180° degrees
• Meets or exceeds all applicable OSHA & ANSI standards

Applications
Perfectly suited for temporary or permanent applications. The reusable D-ring Assembly only requires you to install a new bolt.

Installation
• Drill the hole ¾" Ø & 4 3/8" deep
• Blow hole clean with compressed air
• Use a hammer to drive the Swivel Concrete Anchor into the hole. The D-Ring bracket should be seated firmly against the concrete. Do not expand the anchor bolt by hand before completing installation
• The concrete substrate must be at the minimum of 6¼" thick & the drilled hole must be at least 15" from any free edge
• Minimum spacing is 10" for multiple anchor installation
• Can be used with lanyard, SRL or HLL