Skullgard Full Brim Hard Hat - Tan - by MSA

MSA Skullgard Full Brim Hard Hat ( Tan )

MSA 475407

The Skullgard has built the biggest reputation among all other hard hats. When only the best will do, look no further. It not only provides superior head protection, the Tan fiberglass, is just a fine looking gradient color and sharp looking hard hat.

Designed to offer outstanding protection in hot and dangerous industries, the Skullgard Protective Hat sets the standard for environments such as steel mills. This helmet can withstand temperatures up to, but not exceeding, 350°F while still maintaining its protection capabilities.

• Tan Skullgard Full Brim with Ratchet Suspension
• Smooth crown for easy use of MSA welding equipment
• Fas-Trac® III Suspension
• Standard (6 ½-8")
• USA Approvals: SEI - HD_MSA_15_V32_LT; ANSI/ISEA Z89.1-2009 (Class G, Type I)

• An MSA helmet should not be altered or modified in any way. However, it is permissible to use pressure-sensitive, NON-METALLIC stickers or tape with self-adhesive backing as long as they are placed no closer than ½" from the helmet’s edge. According to MSA test results, non-metallic stickers or tape placed in such locations will not affect the burn-through (i.e. dielectric classification) of an MSA helmet‘s structure.

Skullgard Caps and Hats are designed for use in grueling conditions. They have been tested to withstand radiant heat loads up to, but not exceeding, 350˚F. Additionally, these helmets meet the voluntary reverse donning and low temperature conditioning (LT) requirements of ANSI/ISEA Z89.1.

• Classification: Type I, Top Impact
• Application: General purpose, elevated temperature1
• Market(s): Steel mills, welding, construction, open-pit mining, oil/gas/petrochemical
• refineries, rubber manufacturing, steam tunnels
• Shell Material: Phenolic
• Available Styles: Non-slotted Cap, Non-slotted Full-Brim Hat,
• and Non-Slotted Cap or Hat w/ lamp bracket and cord holder
• Sizes: Cap: Standard (61⁄2 – 8"); Large (7– 81⁄2")
• Hat: Standard (61⁄2 – 8")
• Standards: ANSI/ISEA Z89.1-2009 (Class G)
• Certification: Third-party by SEI