Skyhook Flashing Kit Primer | Guardian 00352

Our Price: $101.40

Availability: Usually Ships in 24 to 72 Hours
Product Code: 00352

Qty:

Description

The Guardian Fall Protection "Skyhook Flashing Kit" is an accessory to the Guardian Fall "Skyhook" series and designed to keep water from entering the joint of dissimilar materials on roofs. This flashing kit is available in a pre-primed ready-to-go paint finish. Gaskets are not included.

• Works with Skyhook Anchors 00310-00340

• 26ga. metal flashing is designed specially for Skyhook
• Wood or metal substrate construction

Flashing available in a pre-primed ready-to-go paint finish
Gaskets also available (sold separately)
Accessory to Guardian Fall "Skyhook" product
Keeps water from entering joints between dissimilar materials
For use with Skyhook permanent roof anchor

PROPER USE:

Paint the metal flashing before installation.

Skyhook flashing is installed by placing 4 screws, one in each corner of horizontal flange of the flashing, through the flashing and roofing material directly to the roof decking.

If the optional Gasket Large (00359) is used, install it under the Skyhook before the anchor is installed.

If the optional Gasket Small (00358) is used, install it over the installed anchor, around the Skyhook upright, between the metal flashing and the Skyhook unit.

Apply caulking around the upright after the metal flashing is screwed into the decking to create a watertight seal.