Glyder2 Sliding Beam Anchor

Our Price: $341.00

Sale Price: $327.99

Savings: $13.01

Availability: Usually Ships in 1 to 2 Days
Product Code: 2104700

Qty:

Description

Technical Specs

Glyder2™ DBI-SALA Sliding Beam Anchor

DBI SALA 2104700

Provides complete horizontal mobility, tie-off overhead or at your feet (use with Force2™ shock absorbing lanyard when used at your feet)
Anchor effortlessly slides across the beam on its wear pads, eliminating metal-to-metal contact
Rotating D-ring tie-off point is fixed in center, with dual clamp adjustment and the D-ring fixed to the middle of the load bar, it allows you to perfectly center the device on the beam for smooth operation
Integrated ratcheting adjustment system provides quick and easy installation and removal. NO MORE PINS AND CHAINS!
Unique guarded locking mechanism protects the anchor from accidental disengagement.
Dual beam grip adjustment prevents twisting and turning as it moves along the beam
High strength steel and aluminum construction & extremely rugged & corrosion resistant
Extremely lightweight at only 3.7 lbs (1.66 kg), with a user capacity of 420 lbs. (189 kg) and a minimum breaking strength of 5,000 lbs (22kn)
Replaceable synthetic wear pads
Fits flange 3-1/2" to 14" wide and up to 1-1/4" thick
Meets or exceeds all applicable industry standards including OSHA, ANSI A10.32, Z359.1 and EN795

For complete horizontal mobility, the Glyder 2™ is designed for use with the DBI-SALA Force2™ shock absorbing lanyard when used at your feet. Enjoy total fall protection, along with freedom of movement, as the anchor effortlessly slides across the beam following you as you work. Easily installed and just as easily removed and taken to a new site, DBI-SALA beam anchors provide economical flexibility. You can also depend on both our fixed and sliding beam anchors to stay securely attached to a horizontal beam. If there is a fall, we make sure you're secure!

Attachment Type Info	Clamp
Fits I-Beam Flange Width	3-1/2 to 14 in. (9-35.5cm)
Install Type	Reusable
Capacity	310 lbs. (141 kg) ANSI / 420 lbs. (190 kg) OSHA
Brand	DBI-SALA®
Sub Brand	Glyder™
Size	3-1/2 in. to 14 in. wide I-beams (9-35.5cm) up to 1-1/4" thick (3.2cm)
iSafe Equipped	Yes
Length	3-1/2 in. to 14 in. wide I-beams (9-35.5cm) up to 1-1/4" thick (3.2cm)
Label	Vinyl
Wear Pad	Polyethylene
Fastener	Stainless Steel and Zinc Plated Steel
Model	2104700
Physical Dimensions	19.30x3.00x4.30 (in)
Physical Weight	3.90 lbs (1.8kg)
Product Styles	Mobile
Product Types	Anchors for Steel
Standards	OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req., ANSI A10.32, ANSI Z359.1

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Anchor Points > Steel Anchors
Anchor Points
Manufacturers > DBI-SALA