Nano Lok Edge SRL - 8' cable

Our Price: $514.00

Sale Price: $440.50

Savings: $73.50

Availability: Usually Ships in 1 to 2 Weeks
Product Code: 3500216-3500291

Qty:

Description

Technical Specs

Nano-Lok™ Edge SRL with 8' cable, Rebar Hook hook and Quick Connector
3500216

You live on the Edge. We'll keep you safe. Specifically designed for foot-level tie-off and sharp edge applications.

8 ft. (2.4 m) working length
Ergonomically designed for comfort
Single and 100% tie-off units available
Meets the most stringent safety standards
Wow! It's orange. So you know your worker has the right gear for the job.

How does Nano-Lok™ edge pass ANSI Z359.14 while others fail? The Nano-Lok™ edge uses an innovative combination of lifeline material, energy absorption, and harness connection to reduce forces on both the worker and the edge. Minimizing the effect of
the edge allows you to "effectively defeat gravity every time."

3500210: Nano-Lok™ Edge single Leg Self Retracting Lifeline with Quick Connector anchorage connection and Rebar Hook

Instructions are provided for informational purposes, customers need not to worry about a complicated attachment procedure. This SRL's are designed with ease of use for the customer to install correctly. So, don't get caught up, thinking this is a really daunting task, it is a so easy to install an Iron Worker could do it.

Twin SRL Harness Interface: In climbing applications where 100% tie-off is required, the Twin SRL Harness Interface can be used to mount two Nano-Lok SRLs side-by-side on the back of a Full Body Harness just below the Dorsal D-Ring (see Figure 9). To mount two Nano-Lok SRLs on a Full Body Harness with the Twin SRL Harness Interface:

1. Loosen the Harness Webbing: Pull out on the Web Straps (A) where they pass through the bottom of the Dorsal D-Ring (B) until there is sufficient space to slide the Twin Leg Interface between the Web Straps and D-Ring Pad.

2. Open the Harness Interface: Push up on the Connector Insert (C) to unsnap the Clamps (D) from the Connector and then swing the Connector Insert up to unlock the Gate. Push the Gate (E) inward to open the Connector.

3. Thread the first Nano-Lok SRL onto the Harness Interface: Insert the Nose of the Connector (F) through the Swivel Eye (G) on the SRL and then rotate the SRL around to the Gate End of the Connector (H). The Gate can be rotated toward the Nose to allow clearance for the Swivel Eye between the Gate and Spine of the Connector.

4. Position the Harness Interface around the Web Straps: With the Gate facing up, insert the Nose of the Connector (F) behind the Web Straps (A). Rotate the Connector behind the Web Straps until the Connector surrounds the the Web Straps.

5. Add the second Nano-Lok SRL on the Harness Interface: Slide the SRL’s Swivel Eye (G) over the Nose of the Connector (F) and position the SRL Swivel Eye in the Nose End of the Connector (I). Swing the Gate (E) closed.

6. Close the Harness Interface: Rotate the Connector Insert (C) forward so the Clamps (D) secure on the Connector. When properly closed, the Web Straps should pass through the Webbing Slot (J) at the top of the Connector Insert and the SRL Swivel Eyes should be secured in the Recesses (K) on either side of the Connector Insert. Once the Harness Interface is closed, pull the Web Straps (A) back through the Dorsal D-Ring and D-Ring Pad to eliminate slack in the webbing and secure the Connector between the Web Straps and D-Ring Pad.